Category: Wearables

Beginner Tips for DIY Wearable Tech

Here’s a guide I’ve been meaning to make for a while– consider it your jumping-off point if you want to get started making your own wearable tech. I’ve published dozens of DIY wearables projects over the years, from LED costumes to Internet-connected sensor jewelry. Here are my best tips for beginners, including answers to common questions.

The first thing you need to get started is an idea. Think about solving a problem or enhancing an experience, either for yourself or someone you know. Maybe there’s a costume or cosplay you’ve always wanted to wear.

The second thing you need is the curiosity, drive, and resourcefulness to learn the skills needed for your idea, which you do not already possess. I’m hoping this guide will help with some of that.

The final thing you need is some motivation to start and/or finish your project, which may come from within, or maybe an event or contest.

It’s important to evaluate your skill level and bite off an appropriate amount of new material to chew on, so as not to get too frustrated to finish your project. Work smarter, not harder. Readymade battery-powered fairy lights, LED strips, and EL wire are perfectly acceptable materials, especially if you’re not ready to take on microcontroller programming or soldering.

(more…)

Penny’s Computer Watch

Today I’m sharing how I made a replica of Penny’s video watch from Inspector Gadget.

I 3D printed the case, buttons, and strap, and wired up the circuit using an Arduino Nicla Voice, which is available at Digi-Key.

(more…)

Mermaid LED Hair

I’ve wanted to make a mermaid hair accessory since Dianna Cowern and I met in 2018. This is her idea, but she’s incapacitated by long COVID.

So I’m making this project with my hair and makeup artist, Hinano Leung, and sending our love to Dianna in spirit.

(more…)

Zodiac Embroidery

Here’s an easy beginner embroidery project that celebrates your favorite constellation. Follow along to see how I made this classic constellation and also this glowing version made with LEDs and conductive thread.

Supplies

For this project, you will need:

To keep up with what I’m working on, follow me on YouTube, Instagram, Twitter, Pinterest, and subscribe to my newsletter. As an Amazon Associate I earn from qualifying purchases you make using my affiliate links.

(more…)

Garmin Fenix 6S Pro Smartwatch Review

The Garmin Fenix 6S smartwatch is the first watch I’ve worn since the Moto 360. It’s hailed as the ultimate sports and adventure watch and includes maps and onboard music storage. I was skeptical about wearing a watch at all, but wanted the fitness tracking features of an activity tracker in an attractive package I could wear everywhere. This isn’t a short-sighted review: I’ve been wearing the watch for almost six months at the time of this writing. Timing is one factor that lead me to Garmin, since the Fenix 6S made one minor change over the Fenix 5 series that makes a big difference to me: the lug-to-lug distance.

Size on my tiny wrist

Previous 42mm Garmin watches were a little longer from lug-to-lug, so even though the screen’s the same size, the Fenix 6S fits a smaller wrist like mine. I like how easy it is to change to different bands, especially because I can’t stand the sticky feeling of the included silicone one. I picked up two different replacement bands:

(more…)

Silver RFID Ring

This guide will demonstrate how to make a silver ring that holds a glass RFID tag. It’s the same kind folks get implanted in their hands to unlock things like door, computers, or vehicles. I’m not quite brave enough to get the implant but I do like making jewelry and wearing rings, so this solution is perfect for me.

I got these tiny glass ampoule tags and RFID reader from Trossen Robotics– they are the daintiest tags I could find. Normally when mounting a stone on a ring, it’s surrounded on at least one side by metal. I was worried the standard bezel would impact the tag readability, so I wanted to create a design that would allow the most possible open space around the tag. I prototyped the design without a tag, just to see how comfortable it was before scaling up to add the extra pieces and figure out the construction.

I got these tiny glass ampoule tags and RFID reader from Trossen Robotics– they are the daintiest tags I could find. Normally when mounting a stone on a ring, it’s surrounded on at least one side by metal. I was worried the standard bezel would impact the tag readability, so I wanted to create a design that would allow the most possible open space around the tag. I prototyped the design without a tag, just to see how comfortable it was before scaling up to add the extra pieces and figure out the construction.

Prerequisite guides:

To keep up with what I’m working on, follow me on YouTube, Instagram, Twitter, Pinterest, and subscribe to my newsletter.

Supplies:

To make this project, you will need:

As an Amazon Associate I earn from qualifying purchases you make using my affiliate links.

(more…)

Glowing Eyes Costume

Twin Jawas! Double Orko! Two ghost wizards from Bubble-Bobble! This costume hood can be any LED-eyed creature you choose just by changing the colors. I first made this project in 2015 with a very simple circuit and code, but this year I wanted to create an upgraded version with simultaneous animation control across two costumes. This circuit uses one simple, close-range RF remote to control two receivers on the same frequency, and Arduino code employing interrupts to achieve responsive animation changes, based on Bill Earl’s tutorial code.

For this project, you will need:

To keep up with what I’m working on, follow me on YouTube, Instagram, Twitter, Pinterest, and subscribe to my newsletter. As an Amazon Associate I earn from qualifying purchases you make using my affiliate links.

(more…)

Moon Secrets LED Jacket

I had the opportunity to build an LED jacket for Buzz Aldrin to wear in a segment on The Late Show with Stephen Colbert.

Have you been to the moon? Do you know what secrets it holds? I was invited to construct an LED space uniform jacket for Buzz Aldrin to wear in a segment on The Late Show with Stephen Colbert. It’s a fairly straightforward NeoPixel and LED sequin project and I thought you might like to learn how to build something similar at home.

Before you begin, you may wish to check out these helpful prerequisites:

Photo with Stephen by Derek Moreno, wardrobe supervisor for The Late Show

To create an illuminated jacket with NeoPixel motif and LED sequin emblem, you will need some sewing supplies and some electronics supplies from Adafruit. I made a parts wishlist and link individually to them here.

Parts & Expendables:

Tools:

(more…)